HELIX ONE Mk2 INSTALLATION & OPERATION GUIDE
20
DA-MAN-H1-001
www.dohmannaudio.com
Speed is constantly calibrated over 130,000 times per second to deliver precise 33.33 or 45.15 rpm
(factory default).
Default factory set speeds are: 33 RPM & 45 RPM
78 and other RPM’s are available by request
Speed can be adjusted via the use of the speed control adjustment buttons located on the rear panel
of the turntable.
Drive System
Fully integrated Swiss-manufactured high torque motor
Dual belt platter drive designed to reduce static electricity and vibrations.
Power Options
110-120 VAC, 50/60Hz 2A
220/240 VAC, 50/60 Hz 1A
Dimensions
Dimensions in millimetres:
Width 600mm x Depth 480mm x Height 250mm
Dimensions in inches:
Width 23.6” x Depth 18.9” x Height 9.8”
Weight
Combined shipping weight is 105Kg (232 pounds) in a custom road case.
Recommended installation requires a surface capable of supporting up to 95Kg (210 pounds) and be a
minimum of 620mm Wide x 500mm Deep (24.4” Deep x 19.7” Deep) for the isolation platform to
move freely.
Customer Support
Full customer support of Döhmann Audio products is available worldwide through authorized dealer and
representative network. This includes set-up and performance optimization assistance, service and warranty
support. Please refer to your local Döhmann Audio dealer with any enquiries.
Contact:
SEPEA audio
service@sepeaaudio.com
+421 905 612 447 (English, German, Russian, Slovak, Czech)
Factory Contact Information
Döhmann Audio Pty Ltd
Unit 2, 11 Friars Road
Moorabbin Victoria 3189
MELBOURNE, AUSTRALIA
Telephone (General):
+61 409 514 914
Telephone (Factory Technical Support): +61 410 344 938
enquiry@dohmannaudio.com
Please Note:
Please Note:
Please Note:
Please Note: Döhmann Audio products are manufactured in Australia.
Döhmann Audio products are manufactured in Australia.
Döhmann Audio products are manufactured in Australia.
Döhmann Audio products are manufactured in Australia.