11
Tuning to a Preset Radio Station
1. In the Radio mode, press CLOCK/PRESET to the preset mode;
2. Press TUNER-/TIME- and TUNER+/TIME+ to cycle through
radio stations.
line Input
Using the Line Input
Requires a 3.5mm audio cable (Included)
1. Connect a 3.5mm audio cable to the
Line Input
and the audio
output on an Mp3 player or other audio device.
2. Press the
Source
to switch to line in mode.
The display will show “AUX”.
3. Use the native controls on the connected Mp3 player or other
audio source to play your audio through the unit.
When not in use, make sure to disconnect the 3.5mm audio
cable(included).
Alarm
Setting the Alarm
1. In the standby mode;
2. Press and hold VOL+/AL1 until the time is flashing;
3. Press TUNER-/TIME- and TUNER+/TIME+ to adjust the hour,
Press VOL+/AL1 to move to adjust the minute, Press VOL+/AL1
to finish alarm time setting;
4. When the indicator light is come on, press TUNER-/TIME- and
TUNER+/TIME+ to select the Alarm type(between Buzzer and
Radio);
5. Press VOL+/AL1 to the Alarm volume mode;
6. Press TUNER-/TIME- and TUNER+/TIME+ to adjust the volume
level;
(Alarm1 and Alarm2 are setting the same way)
Use the unit
