Doka Platform SCP Original Operating Instructions / Instructions For Assembly And Use Download

Page: 6 / 188

999805802 - 03/2016

Introduction

Original Operating Instructions

Platform SCP

Introduction

Elementary safety warnings

User target groups

▪

This booklet is aimed at all persons who will be work-

ing with the Doka product or system that it describes.

It contains information on the standard design for

setting up this system, and on correct, compliant uti-

lisation of the system.

▪

All persons working with the product described

herein must be familiar with the contents of this

booklet and with all the safety instructions it contains.

▪

Persons who are incapable of reading and under-

standing this booklet, or who can do so only with dif-

ficulty, must be instructed and trained by the cus-

tomer.

▪

The customer is to ensure that the information mate-

rials provided by Doka (e.g. User Information book-

lets, Instructions for Assembly and Use, Operating

Instruction manuals, plans etc.) are available to all

users, and that they have been made aware of them

and have easy access to them at the usage location.

▪

In the relevant technical documentation and form-

work utilisation plans, Doka shows the workplace

safety precautions that are necessary in order to use

the Doka products safely in the usage situations

shown.

In all cases, users are obliged to ensure compliance

with national laws, Standards and rules throughout

the entire project and to take appropriate additional

or alternative workplace safety precautions where

necessary.

Hazard assessment

▪

The customer is responsible for drawing up, docu-

menting, implementing and continually updating a

hazard assessment at every job-site.

This booklet serves as the basis for the site-specific

hazard assessment, and for the instructions given to

users on how to prepare and utilise the system. It

does not substitute for these, however.

Remarks on this booklet

▪

This booklet can also be used as a generic method

statement or incorporated with a site-specific

method statement.

▪

Many of the illustrations in this booklet show the
situation during formwork assembly and are
therefore not always complete from the safety
point of view.

Any safety accessories not shown in these illustra-

tions must still be used by the customer, in accord-

ance with the applicable rules and regulations.

▪

Further safety instructions, especially warnings,
will be found in the individual sections of this
booklet!

Planning

▪

Provide safe workplaces for those using the form-

work (e.g. for when it is being erected/dismantled,

modified or repositioned etc). It must be possible to

get to and from these workplaces via safe access

routes!

▪

If you are considering any deviation from the
details and instructions given in this booklet, or
any application which goes beyond those
described in the booklet, then revised static cal-
culations must be produced for checking, as well
as supplementary assembly instructions.

Regulations; industrial safety

▪

All laws, Standards, industrial safety regulations and

other safety rules applying to the utilisation of our

products in the country and/or region in which you

are operating must be observed at all times.

▪

If a person or object falls against, or into, the side-

guard component and/or any of its accessories, the

component affected may only continue in use after it

has been inspected and passed by an expert.