Quick Reference Guide CMT-30 (r2)
DOKKi
.eu
Legal Notices
This manual and any examples contained herein are provided "as is". JNC makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability, non-infringement and fitness for a particular purpose. JNC shall
not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this
manual or the examples contained herein.
Reproduction, adaptation or translation of this manual is prohibited without prior written permission of JNC Service B.V.
CAUTION: This Quick Reference Guide may be revised or withdrawn at any time without prior notice.
This document provides basic instructions for setting up your DOKKi docking cabinet.
UNPACKING
Do NOT use a knife to open the package or contents as this may result in damaging the product(s)!
Open the outer box on the top-side (indicated by the 'this way up” sign on the labels). Carefully lift the docking cabinet from it's box and
remove the bubble-foil.
REMOVING TRANSPORT TAPE
Several parts have been secured with orange tape, to prevent them
from moving during transport.
Locate and remove all the orange the tape gently and verify that
these parts are in their original operational position.
If not, re-fit or re-insert as necessary.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CMT-30_QRG-003 / December 2014
Orange transport tape
