Quick Reference Guide CMT-6 (v2)
DOKKi
.eu
DOCKING YOUR SCANNER
Hold the scanner between your thumb and index finger on the OPN's body where USB connector is situated in the side (thus, not in the
middle but more to the left side, USB connector pointing downward). Simply connect your scanner to the docking station by gently
placing the OPN over the CMT-6 v2 to align the connectors. When aligned press the scanner down to secure the connection.
Press firmly but never use excessive force when pressing down as this might damage the connectors!
Check for obstructions on both connectors and retry connection.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CMT-6 v2_QRG-002
CMT-6 v2: docking your scanner
