1
Important safety and regulatory information
Safety
INSTALLER ASSUMES ALL RESPONSIBILITY AND LIABILITY FOR THE INSTALLATION OF
THIS PRODUCT.
No information contained in this guide is intended as a warranty on the part of Dolby.
Anyone using this information assumes all liability arising from its use. Product
abuse, use of the product not in accordance with Dolby instructions, or use in an
application for which the product has not been designed is not covered under any
Dolby warranty, nor is Dolby liable for any loss or damage.
Installation must be performed by qualified, licensed, and insured installers, and in
accordance with all laws, rules, and regulations applicable to the installation site.
Failure to do so could result in serious personal injury or even death. Prior to
installing this product, read and completely understand the installation instructions.
You must read these instructions to prevent personal injury and property damage.
Keep the installation instructions in an easily accessible location for future reference.
A licensed professional engineer must approve the placement and method of
attachment to the building structure prior to the installation of the system.
All information presented herein is based upon materials and practices common to
North America and may not directly apply to other countries because of differing
material dimensions, specifications, and/or local regulations. Installers in other
countries should consult with appropriate engineering and regulatory authorities for
specific guidelines.
Any supplied rigging hardware is intended only for use with the specified speaker(s).
The installer assumes all risk of loss and/or injury arising out of the use of the
supplied rigging hardware with any other speaker. All other rigging is considered part
of the venue and/or installer-supplied equipment and is not addressed in this guide.
This guide is not a comprehensive source for rigging in general. Installer assumes all
responsibility for ensuring that accepted rigging and safety practices are employed.
Installer assumes all responsibility for the appropriate use of Dolby supplied rigging
hardware and follows at a minimum all applicable laws, rules, and regulations in
force for each venue.
No open flame sources should be placed on or near the apparatus. Do not install near
any heat sources such as radiators, heat registers, stoves, or other apparatus that
produce heat.
Storage temperature: -4 to +140°F (-20 to +60°C). The products covered by this
manual are not intended for use in high-moisture environments. Moisture can
damage the product and cause corrosion of electrical contacts and metal parts. Avoid
exposing the speakers to direct moisture. Keep speakers out of extended or intense
direct sunlight. Premature product failure or serious personal injury could occur if
this product is used outdoors or in wet indoor environments.
Important safety and regulatory information
Dolby DSR1090 Owner's Manual
4
Issue 1 Part number: 8800304
16 October 2022
