background image

 

42

Press 

a

/

b

 to select “CLOSED CAPTION 

SERVICE”, and press 

ENTER

, and then press 

ENTER

 continually to toggle the CLOSED 

CAPTION services like below:

Press 

ENTER 

to select the desired parameter.

Digital Caption Setup

When viewing a digital channel

Setting the CLOSED CAPTION on the Menu 

screen

•  Closed Caption may malfunction (white blocks, strange 

characters, etc.) if signal conditions are poor or if there are 
problems at the broadcast source. This does not necessar 
-ily indicate a problem with your TV.

•  If any button is pressed to call up the ON SCREEN 

DISPLAY while viewing a CLOSED CAPTION broadcast, 
the closed captions will disappear momentarily.

•  In CC1, CC2, TEXT1, TEXT2, the font style is fi xed.
•  There is a case which doesn't become the font specifi ed 

by the contents of the broadcasting.

•  If the background of the character is transparent, and the 

character of closed_caption is hard to see, the color of the 
background proposes the selection of solid.

Selectable items available for 

Font Style

.

Press 

MENU

 to display the MENU screen, and 

then press 

c

/

d

 to select “Option”.

Press 

a

/

b

 to select “Digital Caption Setup”, 

and then press 

ENTER

.

3

5

Useful adjustment settings

Press 

MENU

 to exit.

6

1

2

Selected item

Default

Type 0

Type 1

Type 2

Type 3

Type 4

Type 5

Type 6

Type 7

Description

The font specifi ed by broadcasting station 
or default font.

Proportional font used in the MENU 
screen.

Monospaced with serifs.

Proportionally spaced with serifs.

Monospaced without serifs.

Proportionally spaced without serifs.

Casual font type.

Cursive font type.

Small capitals.

CLOSED CAPTION S

CLOSED CAPTION SERVICE

VICE

CLOSED CAPTION PREFERENCE

CLOSED CAPTION PREFERENCE

DIGITAL CLOSED CAPTION

DIGITAL CLOSED CAPTION

(CLOSE D CAPTI ON screen)

•  You can adjust 9 items here; they are, 

“FONT SIZE”, 

2

  “FONT STYLE”, 

“FONT COLOR”, 

“FONT OPACITY”, 

5

  “BACKGROUND COLOR”, 

“BACKGROUND OPACITY”,

7

 “FONT EDGE”,

8

 “EDGE COLOR” and

9

 “RESET”.

Setting the CLOSED CAPTION Preference

Press 

MENU

 to display the MENU screen, and 

then press 

c

/

d

 to select “Option”.

Press 

a

/

b

 to select “Digital Caption Setup”, 

and then press 

ENTER

.

1

2

Press 

a

/

b

 to select “CLOSED CAPTION 

PREFERENCE”, and then press 

ENTER

.

3

Press 

a

/

b

 to select a specifi c adjustment 

item.

4

Directly setting the CLOSED CAPTION

Press 

CC

 to change the setting.

Summary of Contents for LC-19SB15U
























































Reviews: