Dolby Laboratories PVS177SG, Owner'S Manual

GB - 14

PLAYING A DISC

This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced
in a manner that allows specific or limited operation during playback. As such, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes
of discs.

“ 

 ” may appear on the screen during operation.  A “ 

 ” means that the desired operation

is not permitted by the unit or disc.

Basic playback

Playing a Disc

1. Slide the POWER ON/OFF button on the left side of unit into on mode.
2. Slide the FUNCTION button on the right side of unit to select DVD mode.

See CUSTOMIZING THE FUNCTION SETTINGS to step 3.

3. Press the OPEN button to open the disc door.
4. Hold the disc by its sides and carefully make it fit onto the central support of compartment with the label side

facing up until you hear a “click”.

5. Close the disc door.

It takes a short while for your unit to load the disc. After loading, for some discs, the unit will automatically start
playback of the disc.

6. Press the   PLAY button.

DVD

CD

Pausing playback (still mode)

Press the 

II

 PAUSE button. To resume normal playback, press the   PLAY button.

Stopping playback

Press the   STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the   PLAY button.
If you press the   STOP button twice, the unit’s memory will be cleared and pressing the   PLAY button will reset
the disc to the beginning.

To skip to a different track

• Press the 

 PREV button repeatedly to skip to the start of the current or previous track.

• Press the 

 NEXT button to skip to the next track.

• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.

(continued to next page)

(continued to next page)

(continued to next page)

(continued to next page)

(continued to next page)