background image

- 10 -

Setup

(continued to next page)

(continued to next page)

(continued to next page)

(continued to next page)

(continued to next page)

A. Connecting a TV

The Unit can be connected to your TV in several different ways, depending on the design of your TV.

RCA Audio/Video cable

Use the supplied Audio/Video cable.
1. Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO IN and left/right AUDIO IN jacks

on your TV.

or

S-Video cable

Use an S-Video cable (not supplied) and the Audio cable (not supplied).
1. Use an S-Video cable to connect the S-VIDEO (DVD) jack on your Unit to the S-VIDEO IN jack on your TV.
2. Use the Audio cable to connect the left/right AUDIO OUT jacks on the unit to the left/right AUDIO IN jacks on your TV.

To wall 

outlet

S-Video cable (not supplied)

Audio cable 

(not supplied)

(red)

(w hite)

To wall 

outlet

Audio/Video cable (supplied)

(red)

(yellow )

(w hite)

Note:

• If you want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT

jacks from the Main Unit to your TV.

Summary of Contents for STS75E







































Reviews: