background image

- 18 -

(continued on next page)

(continued on next page)

(continued on next page)

(continued on next page)

(continued on next page)

Slow-motion play

1. Press the SLOW 

 or 

 SLOW  button in the play mode.

• Two speeds are available. Each time SLOW 

 or 

  SLOW button is pressed, the speed of slow-motion

playback changes in the following sequence:

2. Press the 

 PLAY button to return to the normal  playback speed.

Playing a Disc

DVD

Zooming into an image

While a disc is playing, press the ZOOM/NTSC/PAL button.
• While an image is zoomed, you can use  ,  ,   and   button to shift the view and display the part you want.
• To return to the normal view, press the ZOOM/NTSC/PAL button until the “ 

off

 “ symbol shows. The screen will

return to normal.

• When you reach the edge of the image, the display will not shift anymore in that direction.

SKIP (Forward / Reverse)

While you are playing a disc, press the 

 NEXT button on the remote to move to the beginning of the next chapter

or track. Press the 

 PREV button of the remote to move to the previous chapter or track and automatically start

playing it.

DVD

CD

Fast Forward/Fast Reverse

1. Press the SEARCH 

 or 

 SEARCH button when a disc is playing.

• The disc begins fast scan at x2 speed.

• Four speeds are available. Each time SEARCH 

  or 

 SEARCH

button is pressed, the speed of fast scan changes in the following
sequence:

Note :

You also can press 

 SEARCH 

 button on the remote repeatedly to select different fast scan speed.

2. Press the 

 PLAY button when you reach the desired point to resume playback at normal speed.

DVD

CD

Summary of Contents for STS75E







































Reviews: