112
112
The 64 radio channels offer a wide selection within the frequency band. For a good operation
quality it is necessary to make sure that the selected frequency channel is not used by other
equipment in the working area.
If several remote controls are used in the same location no neighbour channels must be used.
It is necessary to have one free channel between 2 active ones (e.g. 5, 7, 9).
It is recommended to set up a frequency plan in which all the active frequencies of a system
with their application are listed.
Which frequencies are use in a working area can be easily found out by using a standard low-
cost frequency scanner.
It is recommended to select 2 spare frequencies for an application in order to change quickly
in the case of disturbance.
Please check in regular intervals the availability of the selected free channels.
6.2
Selection of the operating frequency
The 64 radio channels offer a wide selection within the frequency band. For a good operation
quality it is necessary to make sure that the selected frequency channel is not used by other
equipment in the working area.
If several remote controls are used in the same location no neighbour channels must be used.
It is necessary to have one free channel between 2 active ones (e.g. 5, 7, 9).
It is recommended to set up a frequency plan in which all the active frequencies of a system
with their application are listed.
Which frequencies are use in a working area can be easily found out by using a standard low-
cost frequency scanner.
It is recommended to select 2 spare frequencies for an application in order to change quickly
in the case of disturbance.
Please check in regular intervals the availability of the selected free channels.
6.2
Selection of the operating frequency
Summary of Contents for BI 5910
Page 129: ...129 129 Appendix Appendix...
