55
55
2.11
Operating modes 8 – 9 monitored zone access
ATTENTION
As a safety gate can be connected to
terminals S21 to S24 the simultaneous
time for the input signals has been
increased from 250 ms to 3 s.
To provide maximum safety during the
time the operator is in the dangerous
area the function activity monitoring
must be active. This function requires
activation of a pushbutton in certain
intervals.
When using the remote control inside
a machine or dangerous area, the
speed of the machine must be reduced
to a safe level. The output signals on
terminal 58 and 17 provide
independent status information for this
function. (see also 2.12 Indication).
As only one control contact is available to
monitor the remote control in the charger
this application is only safety category 3.
2.11
Operating modes 8 – 9 monitored zone access
ATTENTION
As a safety gate can be connected to
terminals S21 to S24 the simultaneous
time for the input signals has been
increased from 250 ms to 3 s.
To provide maximum safety during the
time the operator is in the dangerous
area the function activity monitoring
must be active. This function requires
activation of a pushbutton in certain
intervals.
When using the remote control inside
a machine or dangerous area, the
speed of the machine must be reduced
to a safe level. The output signals on
terminal 58 and 17 provide
independent status information for this
function. (see also 2.12 Indication).
As only one control contact is available to
monitor the remote control in the charger
this application is only safety category 3.
Summary of Contents for BI 5910
Page 129: ...129 129 Appendix Appendix...
