Use
• Light system for the skirting board “Cubica Light System”
• Starter set is only intended for a total length of 5 metre
LED tape
Notes about the LED tape
• use unprotected conductor film exclusively
for installation in the skirting board
• not suitable for damp locations
• LED tape is equipped with self-adhesive
Mounting of the base and cover profiles
Procedure for mounting the LED strip
Attention: The power supply is designed for a maximum of
7.2 m LED tape! Before the LED tape is cut and glued,
a function test should be carried out!
On pages 10-12 you will find a list of possible sources of
error in the event of malfunctions as well as general instal-
lation and safety instructions.
The mounting instructions for the
base and cover profiles can be found
online www.licht-sockelleiste.de, in
the app or in our download center at
www.doellken-profiles.com.
• Cable connection on the
side of the belt (socket is
located in the corner of the
room)
• Cable connection
centrally (socket
between two profiles)
