• connect Y-distribution cable (
F
) directly to LED
connection cable (
E
) and connect first LED tape
• to the second wire of the Y-distribution cable (
F
)
insert the extension-cable(
B
) and connect a second
LED ribbon with another LED connection cable (
E
)
• Cut LED strips to desired length (analog step
3
)
• Perform function test (analog stept
2
)
• Glue the LED tape evenly into the base profile using the
applied fixing tape - remove the protective film of the
applied fixing tape step by step.
• connect Y-distribution cable (
F
) with power supply
plug (
G
) and place cables in the lower part of the
base profile
• Before the cover profile is mounted, repeat the function
test.
1
• Connection of another LED strip
using the Y-
distribution cable
and
2.5 meter extension cable
4c
C
F
E
B
G
C
C
G
E
E
F
B
The power supply is designed for
a maximum of 7.2 m LED tape!
click
click
0
For the extension of the Y-distri-
bution cable, the extension cable
(e.g. for laying the cable behind a
cabinet) is required.
i
click
click
Extension cable
for extension up to
2.50 meter
