Safety instructions
• Installation of the products shall be carried out exclu-
sively by suitably qualified electrical technicians and
with due regard to these instructions, the technical data
sheets and compliant with all national standards and
statutory requirements
• Döllken Profiles accepts no liability for damage caused
by improper handling during installation or general
deployment of the product
• Any unauthorised changes to the products will render rele-
vant certificates and warranty agreements null and void
• Be sure to isolate from mains voltage before installation
or servicing
• Ensure that the connection of the connecting cable to
mains supply/controller complies with the wiring regula-
tions at your location
• The electronic supply must be in agreement with the given
power requirements for the specific module lengths. For
individual specifications, please refer to the technical
datasheets for the specific product version
• The LED modules should only be operated with SELV
controllers carrying the CE mark and complying at least
with EN-61347-2-13. The controllers should include the
following protection: Short-circuit, overload and over-
temperature protection. Ensure that the test mark is that
of an independent authorised test institution
• Safe operation is ensured only by electrical connection
in parallel. Series connection of the LED modules is
expressly not recommended
• Non-symmetric voltage drops may result in serious over-
loading and the destruction of individual modules
• Prevent electrostatic discharges (ESD) during installation
Mit Erscheinen dieser Version werden alle vorherigen Versionen ungültig.
Publication of this version shall render all prior versions invalid.
Letztes Update: 19.04.2021 / Last update: 19.04.2021
RoHS
Batteries and accumulators
must not be disposed of in
the household waste.
Döllken Profiles GmbH
Industriestraße 1
59199 Bönen
Follow us on
T: +49 3643 4170 711
F: +49 3643 4170 330
info@doellken-profiles.com
www.doellken-profiles.com
