9
clockwise to make sure chain fixed well. During
adjustment, if the chain is fixed too tight, please turn
the nut counterclockwise and push the rear wheel
forward.
If there are any parts needed to be adjusted, fix the
screw and other parts tightly according to the
requirements below.
(Fig. 21)
For European countries only
EC DECLARATION OF CONFORMITY
The undersigned, Tamiro Kishima and Rainer
Bergfeld, as authorized by Dolmar GmbH, declare that
the DOLMAR machine(s):
Designation of Machine:
Motor-assisted bicycle
Model No./ Type: AB-1816
are of series production and
Conforms to the following European Directives:
2004/108/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN55014-1: 2006, EN15194: 2009,
EN61000-3-2: 2006, EN61000-3-3: 2008,
EN55014-2/A2: 2008, IEC61000-4-2: 2008,
IEC61000-4-3: 2006, IEC61000-4-4: 2004,
IEC61000-4-5: 2005, IEC61000-4-6: 2006,
IEC61000-4-11: 2004
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
15. 7. 2010
Tamiro Kishima
Rainer Bergfeld
Managing Director
Managing Director
Parts
Standardtwist
Remarks
Locknut
14 – 18 N.m.
The press sticker cannot show out
Stem
20 – 25 N.m.
The safety line of stem cannot be seen
Seat screw
18 – 20 N.m.
The safety line of seat post cannot be seen
Seat and fix the seat parts
18 – 22 N.m.
Hub
30 – 35 N.m.
Hub nut
35 – 40 N.m.
Pedal
18 – 20 N.m.
Handlebar
18 – 20 N.m.
The following standards are used for safety:
EN14764: 2005, EN15194: 2009
Summary of Contents for AB-1816
Page 2: ...2 1 2 3 4 5 6 7 8 Hs H A B A H B 1 2 3 4 ...
Page 3: ...3 9 10 11 12 13 14 5 6 7 8 9 10 11 14 12 13 a b a b c ...
Page 4: ...4 15 16 17 18 19 20 21 16 15 15 16 17 18 19 20 21 22 23 24 25 25 26 21 ...
Page 36: ...ALA AB 1816_6L_0610 DOLMAR GmbH Postfach 70 04 20 D 22004 Hamburg Germany http www dolmar com ...