13 ENGLISH
Malfunction status
Mower does not start.
Cause
Two battery cartridges are not
installed.
Battery problem (under voltage)
Cutting height set is too low.
Battery power is dropping.
Action
Install the charged battery
cartridges.
Remove the foreign object.
Motor stops running after
a little use.
It does not reach maximum
RPM.
Cutting tool does not rotate:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Blade is imbalanced, excessively
or unevenly worn.
The drive system does not work
correctly.
Foreign object such as a branch is
jammed near the blade.
The drive system does
not work correctly.
Battery cartridge is installed
improperly.
Battery's charge level is low.
Recharge the battery cartridge. If
recharging is not effective, replace
battery cartridge.
Recharge the battery cartridge. If
recharging is not effective, replace
battery cartridge.
Recharge the battery cartridge. If
recharging is not effective, replace
battery cartridge.
Ask your local authorized service
center for repair.
Ask your local authorized service
center for repair.
Replace the blade.
Install the battery cartridge as
described in this manual.
Raise the height.
The lock key is not inserted.
Insert the lock key.
OPTIONAL
ACCESSORIES
CAUTION:
•
These accessories or attachments are recom
-
mended for use with your Dolmar tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Dolmar service
center.
•
Blade
•
Makita/Dolmar genuine battery and charger
NOTE:
•
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
Summary of Contents for AM-3738
Page 2: ...1 2 1 2 1 2 1 1 1 2 1 2 1 2 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 2 ...
Page 5: ...1 2 1 2 Fig 25 Fig 26 Fig 27 5 ...
Page 74: ...74 ...
Page 75: ...75 ...