Dolmar PE-CS, Original Instruction Manual

3

Approved power unit

This attachment is approved to use only with the following power 

unit(s):

CS-246.4C  Multi function power head

AC-3600, AC-3610

Cordless multi function power head

 WARNING:

Never use the attachment with non-approved power unit.  

Non-approved combination may cause serious injury. 

Part description

1

2

3

5

4

The numbers below refer to the figure.

1. Shaft

2. Blade case

3. Wheel

4. Gear case

5. Blade

Safety precautions

 WARNING:

Read all safety warnings and all instructions in this booklet 

and the instruction manual of the power unit. Failure to follow 

the warnings and instructions may result in electric shock, fire 

and/or serious injury.

Save all warnings and instructions for future reference.

The term “edger” and “equipment” in the warnings and precautions 

refer to the combination of the attachment and the power unit.

The term “motor” in the warnings and precautions refers to the 

engine or electric motor of the power unit.

Intended use

This equipment is only intended for edging the lawn in 

• 

conjunction with an approved power unit. Never use the 

attachment for the other purpose. Abusing the attachment may 

cause serious injury.

General precautions

Before starting the equipment, read this booklet and the 

• 

instruction manual of the power unit to become familiar with the 

handling of the equipment.

Do not lend the attachment to a person with insufficient 

• 

experience or knowledge regarding handling of the equipment.

When lending the attachment, always attach this instruction 

• 

manual.

Do not allow children or young persons under 18 years old to use 

• 

the equipment. Keep them away from the equipment.

Handle the equipment with the utmost care and attention.

• 

Never use the equipment after consuming alcohol or drugs, or if 

• 

feeling tired or ill.

Keep in mind that the operator or user is responsible for 

• 

accidents or hazards occurring to other people or their property.

Never attempt to modify the attachment.

• 

Follow the regulations about handling of the equipment in your 

• 

country.

Personal protective equipment

Wear safety helmet, protective goggles and protective gloves to 

• 

protect yourself from flying debris or falling objects.

Wear ear protection such as ear muffs to prevent hearing loss.

• 

Wear proper clothing and shoes for safe operation, such as 

• 

a work overall and sturdy, non-slip shoes. Do not wear loose 

clothing or jewelry. Loose clothes, jewelry or long hair can be 

caught in moving parts.

When touching the cutting blade, wear protective gloves. Cutting 

• 

blades can cut bare hands severely.

Work area safety

Operate the equipment under good visibility and daylight 

• 

conditions only. Do not operate the equipment in darkness or fog.

Start and operate the engine only outdoors in a well ventilated 

• 

area. Operation in a confined or poorly ventilated area can result 

in death due to suffocation or carbon monoxide poisoning.

During operation, never stand on an unstable or slippery surface 

• 

or a steep slope. During the cold season, beware of ice and snow 

and always ensure secure footing.

During operation, keep bystanders or animals at least 15 m 

• 

away from the equipment. Stop the motor as soon as someone 

approaches.

Before operation, examine the work area for stones or other solid 

• 

objects. They can be thrown or cause dangerous kickback and 

result in serious injury and/or property damage.

• 

 WARNING: Use of this product can create dust containing 

chemicals which may cause respiratory or other illnesses. 

Some examples of these chemicals are compounds found in 

pesticides, insecticides, fertilizers and herbicides. 

Your risk from these exposures varies, depending on how often 

you do this type of work. To reduce your exposure to these 

chemicals: work in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that are specially 

designed to filter out microscopic particles.

Putting into operation

Before assembling or adjusting the equipment, switch off the 

• 

motor and remove the spark plug cap or the battery cartridge.

Before handling the cutter blade, wear protective gloves.

• 

Before starting the motor, inspect the equipment for damages, 

• 

loose screws/nuts or improper assembly. If the cutter blade 

is bent or damaged, replace it. Check all control levers and 

switches for easy action. Clean and dry the handles.

Never attempt to start the motor if the equipment is damaged or 

• 

not fully assembled. Otherwise serious injury may result.

Adjust the shoulder harness and hand grip to suit the operator’s 

• 

body size.