14
DOLOMITE
ALPHA ADVANCED
ADJUSTMENT OF BRAKE HANDLE
1. Loosen the screw (1) with the attached key, Important! Make sure the socket head wrench is
fully fitted befor starting to tighten or slacken.
2. The fastening device (2) can now be height and sideways-adjusted and the brake can by
means of the ball joint be rotated for optional hand location and optional function direction.
3. Tighten the screw (1) again after the brake has been set as desired.
4. The walker is stopped at parking by moving the handle in the opposite direction.
A clear clicking sound indicates that the brake is in the right position. It is important that both
brakes are set in the parking position. To release the brake - pull backwards.
Note:
The brake can be set at a greater angle by twisting the pipe (3) in connection with the
depth adjustment
1
2
