Periodic cleaning of the unit is recommended to ensure optimum performance.
Disconnect the electrical supply.
Remove the two cover-mounting screws.
Remove the cover.
Clean all dust lint from the interior of the dryer.
Replace the cover. Do not over tighten the screws.
Wipe the cover with a damp cloth and mild
cleaning solution. Do not Soak. Never use
abrasives to clean the cover.
4
Operation
N
o-touch operation.
S
hake excess water from hands.
P
lace hands under the outlet to start operation.
R
ub hands lightly and rapidly.
S
tops automatically after hands are removed.
Operating Instructions and Parts Manual
Hand Dryer
Operation
Surface-mounted high speed hand dryer
Cleaning and Maintenance (Every six months is recommended)
Recommended mounting heights
Men
Women
Children 4-7 years
Children 8-10 years
Children 11-13 years
Children 14-16 years
Wheelchair
1194 mm
889 mm
991 mm
1092 mm
1194 mm
1016 mm
1270 mm
‘Unit should be mounted to give no less than 300 mm
clearance from the bottom of the unit to the nearest surface below’
- from bottom edge of dryer above finished floor (AFF)
A. Warm air speed adjustment
VR.FOR AIR SPEED
Sett
i
ng Adjustment
1.
Use phillips screw to adjust air speed.
2.Clockwise: Increases the air speed(+)
.
3.Counterclockwise: Decreases the air speed(-)
.
Operation
B. Sensor range adjustment
1.
The recommended unit sensor range is 170 mm.
This can be adjusted from 100 mm to 230 mm.
2.Clockwise: Increases the sensing range(+)
.
3.Counterclockwise: Decreases the sensing range(-)
.
4.DO NOT OVERTURN!
VR.FOR
SENSOR
Summary of Contents for BC2009
Page 1: ...BC2009 Hand Dryer ...
