10
|
Dolphin Blue
|
BC 634
If desired, use the remote control to adjust the soap
dispenser settings. Hold the remote control straight in
front of the sensor in a distance of about 4-6” (10-
15cm).
Attention: Holding the soap dispenser remote
control out of the recommended range (too close or
too far)may interfere with the remote’s activation.
Choose the function you want to adjust by pressing
on the function button as following:
1 Soap Quantity
The 1-4 drop keys allow the user to choose the
desired soap quantity.
Indication: continues blink of the red light in the sensor eye.
* The exact soap dosage depends on the soap viscosity.
1
0.2 to 0.4
2
0.7 to 0.9
3
1.2 to 1.6
4
2.1 to 2.3
2. ADJ
This function allows coming back to soap quantity factory settings. Press the ADJ
button. Indication: 2 blinks of the red light in the sensor eye.
3 Temporary Off Function
This function is ideal to perform any kind of activity in front of the sensor without
operating the system (for example, cleaning). The soap dispenser will remain shut for
1 minute when this button is pressed once. To cancel this function and to return to
normal operation press the On/Off button again or wait 1 minute.
Indication: OFF – 2 fast blinks, ON – 4 fast blinks
4 Refill The Soap Tank
Once the soap tank has been refiled, press the FILL button. The pump would work
for one minute in order for the soap to start coming out of the soap dispenser
spout. To stop this activity press the FILL button again.
SETTINGS ADJUSTMENT WITH
A REMOTE CONTROL
