4
|
Dolphin
|
DB620 / DB 625
PRE INSTALLATION VERSION
Check contents
Separate all parts from packaging and check each part with the pack contents
section.
Make sure all parts are accounted for before discarding any packaging material. If
any parts are missing, do not attempt to install the electronic tap until you obtain
the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic system operated by
an infrared sensor.
To prevent reflection problems, it is recommended keep a minimum distance of 1.50
meters between the tap and other objects.
Preparation for installation
Flush water supply lines thoroughly before installing the tap. Do not allow dirt,
Teflon tape or metal particles to enter the tap.
All plumbing is to be installed in accordance with applicable codes and regulations.
Important:
All plumbing is to be installed in accordance with applicable codes and regulations.
Operation
Once the kit is installed and connected to the water supply: Water will be delivered
automatically when the user leaves the sensor range after using the urinal. The
water flow
