Useful Operation Tips
Avoid changing the Wave's setting and parameters unless necessary.
After each cycle:
-
Roll the floating cable on the floor, in large circles; place the rolled cable on the Caddy.
-
Clean with water the inner side of top cover, around the lock mechanism.
-
Clean inner body of the Wave if necessary.
-
Clean filter bags.
-
Inspect for foreign object stuck in driving system moving parts.
Once a week:
- Release tangled floating cable if needed - fully straighten and then roll in order.
- Clean all brushes from foreign objects stuck.
-
Remove bottom net (under filter bags) and clean bottom body, if needed.
Whenever the Caddy is positioned in direct sunlight, keep LCD cover closed.
If extension power cord is used, verify that the plug is not in water or wet area.
Summary of Contents for Wave 300 XL
Page 1: ......
