Programming and management with software or app
111
Status messages and signal sequence
You can use your DOM device when you have completed the programming
process.
Familiarise yourself with the status messages and signal sequences described
below to keep yourself informed about the operating status of your DOM
device at all times.
The signalling/visualisation indicating whether a locking medium is authorised
or not is carried out on each connected unit.
Power supply ok
The upper LED is red.
Recognition of an authorised locking medium
The lower LED lights up green in accordance with the set contact hold time
and you will hear an audible signal. The LED lights up red once the contact
hold time has elapsed.
Recognition of an unauthorised locking medium
The upper LED on the unit where the locking medium was presented briefly
flashes red twice. The upper red LED goes out once on all other connected
units.
The locking medium is rejected if no conventional authorisation exists at the
time of showing regardless of whether the locking medium participates in the
extension of validity or data update (Access Manager Terminal or Access
Manager ITT) or not.
