Access Manager or RF Net Manager
115
Dismantling device
Access Manager or RF Net Manager
Proceed as follows to remove the housing cover:
Lift the housing cover slightly at the locking point with a flat-blade
screwdriver.
Push the cover upwards and then pull it away to the front.
The other components are always dismantled in reverse order to assembly
(please refer to page 59 onwards).
ENiQ Module Reader/Module Reader Terminal
ENiQ Access Manager or Access Manager Terminal
Proceed as follows to remove the housing cover:
Lift the housing cover slightly at the locking point with a flat-blade
screwdriver.
Push the cover upwards and then pull it away to the front.
The other components are always dismantled in reverse order to assembly
(please refer to page 59 onwards).
VOX-IO-Touch
Insert a slot-head screwdriver no more than 4 mm wide into the release
openings.
Press the locking strip out until it is released.
Pull the locking strip out (1).
Slide the reader module upwards until it locks into place (2).
Lift the reader off to the front.
