56
57
SCOPE OF SUPPLY
Depending on the order:
Pro cylinder readable on one side
• Basic length 30/30 mm
• Maximum installation length (without knobs): 80/80 mm + if
necessary core pulling protection (8,5 mm)
• 1x fixing screw; battery pack (pre-assembled)
or
Pro cylinder readable on both sides
• Basic length 30/30 mm
• Maximum installation length (without knobs): 80/80 mm + if
necessary core pulling protection (8,5 mm)
• 1x fixing screw; 2x battery pack (pre-assembled once);
1x fixing bracket included
or
Pro half cylinder
• Basic length 30
• Maximum installation length (without knobs): 80 mm
• 1x fixing screw; battery pack (pre-assembled)
On request: installation lengths greater than 80 mm, additional
designs according to technical datasheets.
Optionally available
• Master Card, Programming Card, RF wake-up card, RF online
card, battery change card, service/maintenance card, cons-
tantly open card, constantly closed card in ISO cheque card
format
• Knob tool
• Fixing bracket
• Battery pack
• Special key EE IM
• Torx screwdriver T6
• Transponder in different designs
(tag, ISO card, clip tag, etc.)
• “ENiQ® Access Management” or “ELS” management software
for PC or laptop
• USB radio stick for programming and management
with software
• PC desktop reader for reading and writing locking media
into software
• ENiQ® EasyFlex Booklet (only for the ENiQ® family)
• Please refer to the current price list for additional accessories
All the access control components and therefore the Pro cylinder
leave the factory in a neutral state. They are only “initialised” i.e.
assigned to a Master Card shortly before installation. From this
moment onwards, programming can only be performed on the
terminal device from this Master Card or from a Programming
Card authorised with this Master Card. Therefore, the owner of
the Master Card exclusively decides on assignments and the al-
location of authorisations. As an alternative, authorisations can
be stored on the transponders.
Please note: Keep the Master Card in a safe place
to which only authorised persons have access. The
Master Card does not have a locking function! If the
Master Card is lost, you must contact your dealer.
Extensive reprogramming will be required.
Pro cylinder, readable on one side
The standard version of the Pro cylinder offers complete security,
flexibility and convenience. The cylinder meets the current sta-
te of the art and offers maximum protection against attempts at
electronic and mechanical manipulation.
Locking media (users) can be managed with numerous access
control functions (daily and weekly schedules, etc.). The event
storage function ensures the traceability of door openings. Trans-
ponder-based identification takes place on the outside of the
door. From the inside, the door is always used with the mechani-
cal knob, without identification.
Pro cylinder, readable on both sides
The characteristics remain the same as the Pro cylinder reada-
ble on one side, with the exception that the outside and inside
knobs are both electronic and rotate freely in this design. As a
result, identification using the transponder is always necessary
before entering through the door – regardless from which side.
This allows you to use the cylinder as an entrance and exit cont-
rol device, for example. By assigning different authorisations for
the outside and inside, flows of people through a property can be
controlled in a targeted way and areas can be clearly separated
from each other.
FUNCTIONAL DESCRIPTION
