62
63
Watch your fingers when installing the electronic
knobs and mechanical knobs on the Pro cylinder as
well as during installation of the cylinder itself. Your
fingers can become crushed if there is not enough
space between the device parts or e.g. the door
frame. When using tools, make sure you use them
properly. Improper use can lead to injuries to limbs
or other body parts such as the eyes.
Caution: The selection of the right size (external/
internal installation length) is of decisive importan-
ce for the Pro cylinder. Ask your specialist retailer /
dealer / electronics partner how you can properly
determine the installation length of the cylinder.
Caution: The instructions should be followed exactly
during installation. The person who carries out the
installation should share these instructions and any
instructions related to maintenance with the user.
Caution: Before a Pro cylinder (and variants) is in-
stalled in a fire-/smoke-resistant door the fire certi-
fication should be inspected to ensure compliance.
Caution: In the event of electrostatic discharge
(sparks or breakdown), electronic components
may be destroyed. For this reason, avoid electrost-
atic charges prior to the (dis)assembly of the knob
sleeve or touch a conductive, grounded object (e.g.
water pipe or heating) beforehand to remove elec-
trostatic charge from your body. Never touch the
electronics components with your fingers.
Caution: Always keep the authorised locking media
in a safe place that is only accessible to authorised
persons.
Caution: If you lose a locking medium, you must
delete/lock it immediately.
Caution: The Pro cylinder may not be oiled or grea-
sed. Do not use any acids at or in the device. Make
sure no humidity can get into the device.
Caution: Always store the Pro cylinder a suitable di-
stance (>10cm) away from the Master Card in order
to prevent accidental initialisation.
ADDITIONAL INFORMATION
FOR THE PRO CYLINDER EE
Caution: To ensure the device functions as inten-
ded, the installation must be carried out very care-
fully by qualified personnel in due consideration of
all installation instructions.
Caution: Prior to the installation of the Pro cylin-
der EE, ensure that the doors and locks have been
properly installed and exhibit no warping. Service
worn locks or replace them with new locks where
necessary. Service any doors under tension or read-
just them as the case may be. After installation, the
knobs must move freely and may not scrape on the
fittings. The knobs must always return to their neu-
tral position on their own after being rotated (cam
flush; see Figure 34 on page 81).
After assembling the Pro cylinder EE, it is essential
to ensure that the escape door system functions
properly.
Caution: Make sure that no safety-relevant signs
or pictograms are concealed or destroyed through
the installation of the Pro cylinder EE. If necessary,
replace signs or pictograms or have them fit at ano-
ther location.
