dom-security.com
5
System
Deleting a transponder with master card or programming card
Hold the master card or programming card twice in
front of the device, then hold the transponder in
front of the device and wait for the signal. Finally, the
device will flash red three times.
The coupling duration can be set with the aid of the
master card. To do so, the card must be held in front
of the terminal device twice (the 1st time: it lights up
turquoise and twice green) - and then immediately
remove it from the reading field: - (the 2nd time: it
lights up green once and yellow once for each
additional second) (Please leave the master card in
the reading field for the number of seconds you want
to set the coupling duration). Finally, the device
lights up once turquoise. A maximum of 30 seconds
is possible. (With Guard, this process is accompanied
by an acoustic signal).
Setting the coupling duration with the MID card
First signal sequence: (blue-green-green)
Second signal sequence: (green-red)
First signal sequence: (blue-green-green)
Second signal sequence: (green - x-times yellow (per second) - turquoise)
ELS/ENiQ® signalling
