ix Gamma
Assembly/Filling the cylinder body
ix Gamma
15
Caution! The position and the number of pin types is specified:
FB/AB pins:
2 FB/AB body pins must be applied at each locking side.
Apply FB/AB body pins only at position P1 - P4, namely at the position
with the smallest values (here: P3 and P4).
N pin:
Apply at least 3 N body pins at each locking side.
Note! Insert the pins on the list from the left to the right into the follower
from the inside to the outside.
innen
6
5
1
4
5
AB
FB
N
N
N
KG
außen
Ill. 3: Cylinder assembly structure
body pins
2. Select the required body pins.
(In the follower from the inside to the
outside)
Ill. 4: Filling the follower
3. Insert the body pins into the fol-
lower according to the specified
position.
4. Apply the pressure springs
(202056) to the pins.
5. Insert the KG body pin (220836)
into the provided borehole of the
follower.
6. Apply the KG function spring
(217706) to the KG body pin.
7. Use the loading knife to press the
springs into the follower until the
knife is flush with the follower.
