domat UC220
03/2017 Subject to technical changes.
5
Setpoint temp. Heating Off mode (Temperature, Heating, Empty house are flashing)
Setpoint temp. Cooling Day mode (Temperature, Cooling, Day are flashing)
Setpoint temp. Cooling Night mode (Temperature, Cooling, Night are flashing)
Setpoint temp. Cooling Off mode (Temperature, Cooling, Empty house are flashing)
Select the requested value by a short push. Turn knob to change value. Confirm by a
short push again.
If there is no user activity for 30 secs, the controller goes to the basic display mode.
Default values:
The default values as well as all other settings (PI parameters, address, baud rate...) can
be set by the configuration program, ModComTool.
Dimensions
All dimensions in mm.
