5
3311145.000 Secondary Burner Housing Kit Service Instructions
Step 3.
Remove the burner cover screw.
Save
for reinstallation.
Step 4. Fold back the tab of the cover. This
will allow the burner cover to shift left
during removal.
Step 5. Slide burner cover to the left and re-
move. It may be necessary to pry the
cover out using a slotted screw driv-
er.
Step 6.
If required for access to install all com-
ponents of Secondary Burner Housing
Kit, remove the burner by removing
the fi ve (5) fastening screws.
Save
for reinstallation.
Step 7.
Slide bottom plate, Item (2), into posi-
tion. Edge with the two (2) mounting
tabs will go toward you. Tabs should
be up. See Step 1 photo. One end of
the bottom plate should rest on the
top of the refrigerator leg.
The bottom plate has two score lines
on it. Although most units will not re-
quire modifi cation, you may need to
shear the bottom plate off at these
locations to get it to fi t on units that
already have a sheet metal barrier
under the burner. (See important
message on page 4 of these instruc-
tions.
Disconnect the LP
gas connection
Step 2
Step 2
Step 3
Step 3
Step 4
Step 4
Step 5
Step 5
Step 6
Step 6
Step 6
Step 6
Step 7
Step 7
Step 7
Step 7
