3311145.000 Secondary Burner Housing Kit Service Instructions
8
{
Step 11. In the unlikely event that the burner
needed to be removed, reinstall burn-
er at this step. Fasten only the right
most screw fi rst using one of the fi ve
(5) screws saved in step 6.
Step 12. Reconnect the LP gas line if you have
removed it as part of this installation.
Be sure to use a back up wrench to
properly secure supply line to gas
valve.
Step 13. Secure the burner with the remaining
four (4) screws from step 6.
Step 14. If necessary, trim the bottom of the
burner cover using a pair of metal
shears as shown.
Leave
suffi cient spacing to enable the
reinstallation of the burner, if burner
removal was necessary.
Step 10
Step 10
Step 11
Step 11
Step 11
Step 11
Step 12
Step 12
Step 13
Step 13
Discard this piece of
the burner cover.
Step 14
Step 14
Step 14
Step 14
