EN
CRX50, CRX65
Installing and connecting the refrigerator
17
7
Installing and connecting the
refrigerator
7.1
Notes on installing the refrigerator
Observe the following when installing the refrigerator:
•
Install the refrigerator so that the warm air produced can easily flow away
(fig.
, page 5).
Key for fig.
Observe the following installation dimensions:
•
Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
•
Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
“Mounting the water drain outlet (optional)” on page 17).
7.2
Mounting the water drain outlet (optional)
➤
Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤
Lay the refrigerator on its side in order to access the bottom side.
➤
Mount the water drain outlet (fig.
2, page 6) aligned to the front or to the
back according to the desired direction.
➤
Remove the water drain plug (fig.
1, page 6) inside the refrigerator.
No.
Explanation
1
Exhaust air
2
Cold intake air
3
Condenser
Model
Dimensions W x H x D (mm)
Dimensions W x H x D (inch)
CRX50
390 x 544 x 550
15.35 x 21.42 x 21.65
CRX65
458 x 535 x 595
18.03 x 21.06 x 23.43
DometicCRX50CRX65_IOM_4445102664_AMER3(en-fr-es)_20xx-xx-xx.book Seite 17 Donnerstag, 13. August 2020 2:13 14
