EN
CFX75DZW, CFX95DZW
Operation
19
7.6
Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 3):
–
once for the large compartment
–
twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Use the “UP +” (fig.
3
10, page 3) and “DOWN –” (fig.
3
9, page 3) buttons
to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works as a
refrigerator compartment or as a freezer compartment.
✓
The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
I
7.7
Switching a compartment off or on
If only one compartment is required, the other compartment can be switched off to
save energy.
Switching off compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
➤
Press the “SET” button (fig.
3
4, page 3):
–
once for the large compartment
–
twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Press the “ON/OFF” button (fig.
3
1, page 3).
✓
“OFF” flashes for five seconds on the display of the respective cooling
compartment, then “OFF” is displayed.
NOTE
The temperature of each compartment can be set to –22 °C. The
manufacturer however recommends a cooling temperature of –15 °C to
–18 °C for normal usage and optimum energy consumption.
CFX75_95DZW--O-US.book Seite 19 Montag, 3. April 2017 5:10 17
