EN
CF35, CF40, CF 50
Operation
15
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
•
On a regularly basis, make sure the lid seal still fits properly.
6.3
Connecting the cooler
Connecting to a battery
(vehicle or boat)
The cooler can be operated with 12 V
g
or 24 V
g
.
A
For safety reasons the cooler is equipped with an electronic system to prevent the
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
➤
Plug the 12/24 V connection cable (fig.
2, page 3) into the DC voltage
socket and also into the cigarette lighter or a 12 V or 24 V socket.
Connecting to a 100 – 240 V AC mains
(e.g. in the home or office)
D
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source of 100 – 240 V. The priority circuit automatically
switches the cooler to mains operation, if the device is connected to a 100 – 240 V
AC mains, even if the 12/24 V connection cable is still attached.
When switching between the AC mains and the battery supply, the red LED may
light up briefly.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
DANGER! Danger of electrocution!
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat from a mains
connection of 100 – 240 V
w
, you must install a residual current
circuit breaker between the 100 – 240 V AC mains and the cooler.
Seek advice from a trained technician.
DometicCF35-CF50_OPM4445101783_EMEA16_202x-xx-xx.book Seite 15 Freitag, 18. Dezember 2020 5:37 17
