EN
Operation
CFX75DZW, CFX95DZW
16
7.3
Connecting the cooler
Connecting to a battery
(vehicle or boat)
The cooler can be operated with 12 V
g
or 24 V
g
.
A
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
Using the fused DC plug
A
➤
Plug the DC connection cable (fig.
1
2, page 7) into the DC voltage socket of
the cooler (fig.
4
5, page 12).
➤
Connect the connection cable to the DC power outlet.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
NOTICE! Danger of damage!
•
For protection of the device the DC cable supplied includes a fuse
inside the plug. Do
not
remove the fused DC plug.
Only use the DC cable supplied.
CFX75_95DZW--O-AU.book Seite 16 Dienstag, 3. April 2018 8:49 08