EN
CFX75DZW, CFX95DZW
Operation
17
Connecting to AC mains
(e.g. in the home or office)
D
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to AC operation if the device is connected to an AC power supply, even if the
DC connection cable is still attached.
When switching between the AC power supply and the DC battery supply, the red
LED may light up briefly.
➤
Plug the AC connection cable (fig.
1
3, page 7) into the AC voltage socket of
the cooler (fig.
4
1,page 12).
➤
Connect the connection cable to the AC power outlet.
DANGER! Danger of electrocution!
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat with an AC mains
connection, you must install a residual current circuit breaker
between the AC mains and the cooler.
Seek advice from a trained technician.
CFX75_95DZW--O-AU.book Seite 17 Dienstag, 3. April 2018 8:49 08