10
cooler as soon as an approximately 5mm thick layer of ice has formed. This is
done by turning off the unit and removing any food or drink therin. Never use
heated appliances, heaters, etc. to speed up the defrosting process! If
necessary, a cloth dipped in warm water can be placed on the unit to help the
defrosting process. After defrosting, clean up the defrosted water with a clean
cloth and clean the cooler containers as described in chapter 4.
Should the unit be out of operation for a prolonged period, turn off unit and
remove contents. After defrosting, the cooler should be cleaned carefully and
dried.
To avoid any unpleasant smells forming in the cooler, the lid should be left
slightly open.
15. Door locking
During transport, the door lock (E), so that the door is kept in a closed and safe
position.
Closed
Park position/vent position
Open
Summary of Contents for A30-100C
Page 1: ...207 5912 05 0402 Type A30 100C Model RF60 Operating instructions GB...
Page 14: ...14 Fig 7 Fig 6 Seal Seals...
Page 15: ......
