EN
PerfectCharge BI01
General safety instructions
9
2.3
Safety when installing the device
D
DANGER!
•
Never mount the device anywhere where there is a risk of gas or dust
explosion.
A
NOTICE!
•
Do not expose the device to a heat source (such as direct sunlight or
heating). Avoid additional heating of the device in this way.
•
Set up the device in a dry location where it is protected against splash-
ing water.
2.4
Safety when connecting the device electronically
D
DANGER! Danger of electrocution
•
For connection on boats:
If electrical devices are incorrectly connected on boats, corrosion
damage to the boat might occur. Have the device connected by a
specialist (marine) electrician.
•
If you are working on electrical systems, ensure that there is somebody
close at hand who can help you in emergencies.
!
WARNING!
•
Make sure that the lead has a sufficient cross-section.
•
Lay the cables so that they cannot be damaged by the doors or the
bonnet.
Crushed cables can lead to serious injury.
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
•
Use ductwork or cable ducts if it is necessary to lay cables through
metal panels or other panels with sharp edges.
•
Do
not
lay the cable so that it is loose or heavily kinked.
•
Fasten the cables securely.
•
Do not pull on the cables.
BI01-IO-16s.book Seite 9 Mittwoch, 13. Juli 2016 3:17 15
Summary of Contents for BI01
