Technical description
MT MPP170, MT MPP260, MT MPP 440
EN
16
The MPP solar charger is
not
suitable for:
• Outdoor use
The energy output of connected solar panels may not exceed the maximum output stated in the
technical data.
This product is only suitable for the intended purpose and application in accordance with these
instructions.
This manual provides information that is necessary for proper installation and/or operation of the
product. Poor installation and/or improper operating or maintenance will result in unsatisfactory
performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the man-
ufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6
Technical description
The MPP solar charger offers the following functions:
• MPP technology with high frequency switching technology for maximum power point tracking
of the solar panel several times per second
• Microprocessor-controlled, temperature-compensated IU0U charging programs for various
battery types
• Auxiliary charging terminal for the starting battery with reduced charging voltage and current
• Buffer operation: Compliance with the charging characteristics even when the battery is
charged with consumers connected
• On-board mains suppression filter: Ensures parallel operation of the solar charger with other
charging sources, for example mains supply chargers or generators.
• Automatic compensation of voltage loss caused by the charging cable length (house battery)
• Dynamic conversion of excess solar panel voltage (max.50 V) into additional battery charging
current
• Measurement output for electroblock (EBL): Enables showing the charging current of the house
battery on the vehicle’s electroblock when equipped with DT/LT display panels
• Terminal “AES/RE” (only MT MPP 260, MT MPP 440): Transfers excess solar power to small
loads or automatic energy selector (AES) capable refrigerators
• Output for remote displays LED I, LCD II or LCD III.
