EN
Operation
CFX95DZW
14
➤
Re-fit centre hinge in new position.
➤
Insert the lids in the hinges on the opposite side (fig.
6
D, page 5).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
3
4, page 3) three times.
➤
Use the “UP +” (fig.
3
10, page 3) or “DOWN –” (fig.
3
9, page 3) buttons to
select Celsius or Fahrenheit.
✓
The selected temperature units then appear in both displays for a few seconds.
The displays flash several times before returning to the current temperature.
6.2
Energy saving tips
•
Choose a well ventilated installation location which is protected against direct
sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost the cooler once a layer of ice forms.
•
Avoid unnecessarily low temperatures.
