EN
Operation
CFX95DZW
18
I
6.6
Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 3):
– once for the large compartment
– twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Use the “UP +” (fig.
3
10, page 3) and “DOWN –” (fig.
3
9, page 3) buttons
to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works as a
refrigerator compartment or as a freezer compartment.
✓
The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
I
6.7
Switching a compartment off or on
If only one compartment is required, the other compartment can be switched off to
save energy.
Switching off compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
➤
Press the “SET” button (fig.
3
4, page 3):
– once for the large compartment
– twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Press the “ON/OFF” button (fig.
3
1, page 3).
✓
“OFF” flashes for five seconds on the display of the respective cooling
compartment, then “OFF” is displayed.
NOTE – Lid Open Alarm
If a lid is left open for three minutes or more and the device is switched
on, the respective interior light will flash until the lid is closed.
NOTE
The temperature of each compartment can be set to –22 °C (–8 °F). The
manufacturer however recommends a cooling temperature of –15 °C
(+5 °F) to –18 °C (0 °F) for normal usage and optimum energy consump-
tion.
