EN
CRP40
Setting up and connecting the refrigerator
15
I
7.2
Releasing the lock
The refrigerator has a locking mechanism (fig.
1, page 5) which is also used to
protect it during transport. The following settings are possible:
A
•
Normal lock
(turn wheel clockwise to the end stop): the door is locked and
secured.
To open the door, lift the handle up and open the door.
•
Vent
(turn wheel anti-clockwise to the end stop): The door is slightly open and
fixed in place.
Use this position, if you are not going to use the refrigerator for a long time.
7.3
Changing the door hinge
You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤
Proceed as shown in fig.
, page 6, to change the hinges.
7.4
Connecting to a battery
The refrigerator can be operated with a 12 V to 24 V
g
voltage supply.
A
➤
Determine the required cross section of the cable in relation to the cable length
according to fig.
NOTE
The cooling unit is detachable and can be installed up to 1.5 meters
away from the refrigerator if there is limited space.
NOTICE!
Only adjust the locking mechanism when the door is open. If you use it
with the door closed, you will damage the refrigerator.
NOTICE!
To prevent voltage and power losses, the cable should be as short as
possible and not be interrupted.
For this reason avoid additional switches, plugs or socket strips.
Summary of Contents for CoolMatic CRP 40S
