EN
CRP40
Setting up and connecting the refrigerator
15
7.4
Connecting to a battery
The refrigerator can be operated with a 12 V to 24 V DC voltage supply.
A
➤
Determine the required cross section of the cable in relation to the cable length
according to fig.
9
, page 6.
Key for fig.
9
, page 6
A
➤
Before starting up the appliance for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤
For the electrical connection you also need the wiring diagram (fig.
0
, page 7).
➤
Connect the refrigerator (fig.
a
, page 7)
–
as directly as possible to the poles of the battery or
–
to a plug socket which is fuse protected with at least 15 A (at 12 V) or 7.5 A
(at 24 V).
NOTICE!
To prevent voltage and power losses, the cable should be as short as
possible and not be interrupted.
For this reason avoid additional switches, plugs or socket strips.
Co-ordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm²
NOTICE!
Make sure that the polarity is correct.
No. in fig.
0
,
page 7
Meaning
1
Electronic terminal rail
2
Compressor
3
DC fan (if present)
4
Mechanical thermostat
CRP40-O-West.book Seite 15 Mittwoch, 1. März 2017 11:15 11
Summary of Contents for COOLMATIC CRP40
