EN
MF6W
Cleaning and maintenance
9
Setting the temperature
You can set the temperature within a range from +5 °C to +20 °C.
I
➤
Press the +
button (fig.
2
4, page 2) to
increase
the desired cooling tem-
perature by 1 °C, or press the
–
button (fig.
2
3, page 2) to
decrease
the
desired cooling temperature by 1 °C.
✓
The cooling temperature set at °C or F° then appears in the display for a few
seconds.
7
Cleaning and maintenance
A
➤
As soon as the refrigerator becomes dirty, clean it with a damp cloth.
I
➤
Make sure that no water drips into the sealing. This can damage the electronics.
➤
Wipe the refrigerator dry with a cloth after cleaning.
➤
Regularly empty the condensation trap on the bottom of the device. To do this,
open the door and pull the condensation trap completely out of the device
(fig.
3
, page 2).
NOTE
The cooling capacity can be influenced by:
–
The ambient temperature
–
The number of bottles to be cooled
–
The frequency with which the door is opened
NOTICE!
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the refrigerator.
NOTE
The interior racks can be removed to facilitate cleaning.
MF6W-O-AUS.book Seite 9 Freitag, 9. Februar 2018 10:47 10
