Dometic ORIGO
Mounting the stove
15
7
Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1
Selecting the installation location
When selecting the installation location, observe the following instructions:
Select a well-ventilated location for the device.
Ensure a minimum distance (fig.
6
, page 4) of
– 50 mm to side and back walls
– 750 mm between stove coil element and horizontal surface above the
stove
Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
Avoid cabinet storage space above the stove.
Otherwise you risk burns and fire when reaching over the stove.
Do
not
operate the device in spaces where danger of explosion is
present.
7.2
Installing the stove
a
Caution – Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤
Cut a rectangular hole into the countertop (dimensions see following
table):
➤
Open the top and remove the canisters (see chapter “Taking out the
canister” on page 17).
➤
Open up the hinge part in the back of the stove.
Model
Dimensions W x D x H
A100
255 x 150 x 340 mm
A200
485 x 150 x 340 mm
C100
255 x 150 x 340 mm
C200
485 x 150 x 340 mm
_Origo_A100_A200_C100_C200.book Seite 15 Dienstag, 26. Juli 2011 7:30 19
Summary of Contents for ORIGO A100
