Cleaning and maintenance
PJS 1000
EN
18
✔
The LCD display shows the remaining state of charge of the jump starter.
8.8 Operating 12 V devices
I
➤
To operate 12 V devices, connect the power cable of the 12 V device to the 12 V DC output of the jump starter
(fig.
✔
The LCD display shows the remaining state of charge of the jump starter.
8.9 Wireless charging
I
➤
To wireless charge devices, press the
button and place your device on the wireless charging pad, see
➤
The LCD display shows the remaining state of charge of the jump starter.
9 Cleaning and maintenance
!
A
➤
Occasionally clean the device with a soft, damp cloth.
➤
Regularly check live cables or lines for insulation faults, breaks or loose connections.
➤
Regularly check the state of charge of the device battery. Charge the battery after each use and at least every
3 – 6 months, even when not in use.
NOTE
Operation of 12 V devices is not possible while the jump starter is being charged.
NOTE
Ensure your device supports wireless charging.
WARNING!
Unplug the device from the power supply before each cleaning and maintenance.
NOTICE! Damage hazard
• Never clean the device under running water or in dish water.
• Do not use sharp or hard objects, abrasive cleaning agents or bleach during clean-
ing as these can damage the device.
Dometic_PJS1000_4445103806_OPM_EMEA17_202x-xx-xx.book Page 18 Friday, October 21, 2022 8:44 PM
