instructions for installation:
The
design of this refrigerator has been certified by the American Gas Association.
Before using your refrigerator, you should wipe it inside and outside with lukewarm water
containing a mild detergent. From time to time, the PVC-seal of the lid should be rubbed with a
little talcum powder.
1.
Installation:
The
installation of the refrigerator must conform to the following American National Standards,
as applicable: ANS 221.74-b -1989 Portable Refrigerator; in Canada: CAN1 -11.4-M79
The overall dimensions of the refrigerator are given in fig. 1.
For installation; for maintaining proper clearances between combustible material and the
refrigerator, the following minimum clearances must be observed:
clearance from rear edge to outer casing of refrigerator: 4 inches
clearance above top of refrigerator lid: min. 6 inches
clearance at sides of refrigerator casing: 0 inches
Fig.
1.
illustrates these minimum clearances.
223’
Floor level installation
Refrigerator cabinet may
be installed with
0
Inch
clearance to rider from
Fig.1
combustibles
2
