Connecting the refrigerator
RCD10.5XES
EN
20
2. Push suitable screws (not included, fig.
1) through the bushes in the sides of the refrigerator, and fasten into
the recess walls.
3. Fit the included bushcaps (fig.
2) into the bushes.
9 Connecting the refrigerator
9.1 Connecting the refrigerator to 12 – 24 V DC
A
The refrigerator can be operated with a 12 V or 24 V DC voltage supply.
For safety reasons, the refrigerator is equipped with an electronic system to prevent the polarity being reversed.
This protects the refrigerator against reversed polarity when connecting to a battery and against short circuiting.
NOTICE! Damage hazard
To avoid voltage drops and loss of performance, keep the connection cable as short as
possible and uninterrupted.
Therefore avoid additional switches, plugs or power strips.
2
1
c
Summary of Contents for RCD10.5XES
Page 30: ...Operation RCD10 5XES EN 30 4 5 3 CLICK CLICK 1 2 6 7 k...
Page 38: ......
Page 39: ......