10
- Reassembly is performed in a reverse order.
- The rosette and the lock cover should be restored by applying slight
pressure. When restoring the lock cover, the bolt should be contracted.
2.2.5. Replacing the door panel
- Replacement of the door panel must be performed when the door and lock
are disassembled
(see sections 2. 2. 1. and 2. 2. 4).
- Remove door shelves. Removing these may be performed by lifting the
shelves.
(Figure 29, 30)
- Place the door – door insert facing downwards – on a protective underlay.
- Remove fastening screws from the frame edge.
(Figure 31)
- Remove the frame edge from its seating.
(Figure 32)
-
Figure 31
Figure 29
Figure 30
Figure 32
